Welding Safety and Cutting Processes
The first course of the welder program, followed through an apprentice's first jobs at a fabrication shop in Nisku, near Edmonton: the trade and the apprenticeship, welding hazards and PPE with filter shade selection, fume, ventilation and respiratory protection, confined spaces, electrical safety and the welding circuit, fire prevention, hot work permits and fire watch, compressed gas cylinders and regulators, oxyfuel equipment, setup and cutting technique, plasma arc cutting, air carbon arc gouging and other thermal cutting, saws, shears, grinders and edge preparation, and a capstone refinery cutting job planned with a job hazard analysis, with the Alberta OHS Code and CSA W117.2 throughout.
WLD-110 12 lessons · 3 h 32 min ▶ Video lessons coming soon
Offered by HSM University · Welding
This is the Canadian version of this course. See the American version.
What you'll learn
- Describe the welder's trade, the Alberta apprenticeship and Red Seal path, the codes that govern structural and pressure welding, and how a fabrication shop is organized for safety
- Identify the radiation, heat, fume, electrical, fire, gas, noise and physical hazards of welding and cutting, and apply the hierarchy of controls to them
- Select and inspect eye and face protection with the correct filter shade, flame-resistant clothing, gloves, footwear and hearing protection
- Explain the health effects of welding fume and gases, calculate time-weighted averages and hood airflow, and choose ventilation and respiratory protection
- Recognize confined space hazards for hot work, including oxygen deficiency and enrichment, and follow entry permit, testing and attendant requirements
- Explain the welding circuit, open-circuit voltage and shock, connect the work lead correctly, and work safely in wet, enclosed and elevated locations
- Prepare a hot work area, complete a hot work permit, keep a fire watch for the required time, and handle containers that may have held flammable material
- Handle, store and connect compressed gas cylinders and regulators, and calculate gas contents by pressure and by weight
- Assemble, leak test, purge, light, adjust and shut down an oxyfuel outfit, and apply the acetylene withdrawal limit
- Make straight, pierced and bevelled oxyfuel cuts, select tips and speeds from a chart, and diagnose cut faults from the cut face
- Set up and use plasma arc cutting and air carbon arc gouging, choose current, speed and consumables, and control their light, fume, noise and electrical hazards
- Use saws, shears and grinders safely, prepare bevels, root faces and clean joint edges, and plan and carry out a complete cutting job with a job hazard analysis and hold points
Course content
12 lessons · 3 h 32 min total · final exam
- 1 The welding trade and the shop 17 min · quiz
- 2 Welding hazards and personal protective equipment 18 min · quiz
- 3 Fumes, ventilation and confined spaces 18 min · quiz
- 4 Electrical safety and arc welding power 19 min · quiz
- 5 Fire prevention and hot work permits 18 min · quiz
- 6 Compressed gas cylinders and regulators 18 min · quiz
- 7 Oxyfuel equipment and setup 17 min · quiz
- 8 Oxyfuel cutting technique 17 min · quiz
- 9 Plasma arc cutting 17 min · quiz
- 10 Air carbon arc gouging and other thermal cutting 16 min · quiz
- 11 Mechanical cutting, grinding and edge preparation 17 min · quiz
- 12 Capstone: a safe cutting job from layout to cleanup 20 min · quiz
- E Final exam 20 questions
Requirements
Recommended background. You can start any course at any time.
Description
The first course of the welder program, followed through an apprentice's first jobs at a fabrication shop in Nisku, near Edmonton: the trade and the apprenticeship, welding hazards and PPE with filter shade selection, fume, ventilation and respiratory protection, confined spaces, electrical safety and the welding circuit, fire prevention, hot work permits and fire watch, compressed gas cylinders and regulators, oxyfuel equipment, setup and cutting technique, plasma arc cutting, air carbon arc gouging and other thermal cutting, saws, shears, grinders and edge preparation, and a capstone refinery cutting job planned with a job hazard analysis, with the Alberta OHS Code and CSA W117.2 throughout.